LM 12/M5MoS2-Powder

DESCRIPTION High purity molybdenum disulphide powder in accordance with the relevant specifications and guarantee analyses. -

PROPERTIES - can be used pure or processed free from any abrasive components
- resistant to acids, alkalis and solvents
- non-conductive
- load carrying capacity above the yield point of all known metals
- lowest coefficient of friction

TECHNICAL
DATA Colour : grey-black
Structure : hexagonal layer lattice
Purity : complies with MIL-M 7866 B
Achievable coefficient
of friction : μ = 0.02
Operating temperature
range : -185 ° C to +450 ° C
+1,100 °C in a vacuum
+1,300 °C under protective gas
Density : 4.8 g/cm3
Average particle size : 1.4 -1.9 μm
Maximum particle size : 5 μm

APPLICATION Used for applying a dry lubricant film to sliding pairs which, due to extreme temperatures or extreme environmental conditions, cannot be lubricated with greases or oils and where no dry lubricant film can be used. Also used for pre-treating workpieces in metal forming and processing in solid media such as sintered metals, plastics, carbon products, rubber and bearing material. Used for lubricating oxygen fittings (up to 40 bar).

INSTRUCTIONS Adjust the quantity added and the application to the conditions under which the product is to be used, for example, drumming, brushing or rubbing in etc.

AVAILABLE
PACK SIZE LM 12/M5 MoS2-Powder 100 g Part no. 4112
250 g Part no. 4113